Cycle North Carolina

Git-r-dun

I have been shopping for a tent the last couple weeks and can't make up my mind. I really don't want to spend $300 on the spiffy models since this tent will spent a looong time before it gets used again. I really like the LL Bean tents but the weatheproof tents are all $300 and up. So, any suggestions on t...

Julie Clark

Can anyone train during the week? I usually go from Downtown to Bryan Park. I would love another route or someone to ride with. Thanks, Julie

Susan Schneider

Need some advise on how to keep the bike dry overnight, I tried plastic bags but the handlebars and seat still get wet. What do you all do, use or recommend. Thank folks!

cyclingfool

We are full week riders and have transportation from Currituck, but would like to find out more info about bus leaving mebane for the 3 day riders and is it available for full week riders. There are about 8 or 10 of us in the burlington, GBO area interested. Did I read it correctly stating that it was for...

Sandrine

Anyone driving down to CNC from southern Ontario? If you are, I would love to hear from you. I am getting myself down but would love if someone could get my bike down. Thanks! sanlevrier@hotmail.com

Jay Solomon

I'm flying from Atlanta, and thinking about trying to fly back from Va. Beach or Norfolk on Saturday afternoon or evening instead of taking the bus back to Raleigh. Anyone from the area have an idea if that would be possible? Is there a place to rent a car in Carrituck to drive to the airport - or another...

Raleigh Rider

Does anyone know if the ride goes through Yanceyville this year? I guess it would be between Mebane and Louisburg. There is a great bike shop there (of all places!) just off the small town square. It is run by Gilbert Anderson, and ex-racer and brevet riders and his personable wife Sue who can wren...

CNC Staff

Today is the last day to register before the late fee kicks in so if you have not registered yet, you only have 8 more hours to do so. After that, there will be a late fee of $25 (week long registrants); $10 (Shorter options and non riders) added to your registration. You can still save $10 on the registra...

SAL

Well, I think it's ridiculous for those of us who take GREAT care of our bikes and I think it's stupid that we need to keep a copy of the completed form with us at ALL times.

J, Atlanta

Anyone have an idea how long it will take to get from the end of the ride at Carrituck to New Port News/Hampton Airport? (assuming four wheel transportation rather than 2!) Thanks. J

David

I am seeking a share-the-cost ride from Carrituck (end of the ride) to the Charleston SC area. If you have room for one more and are interested please call me at 828.508.6535. Thanks.

jay

driving p/up solo from ft myers to ride end, looking for passenger

Rod

There're less than 5 weeks to go, and the furthest my wife and I have ever triked is 38 miles - and that almost murdered my knees! We're trying to keep up with the training program, but the heat wave's messed with our ability to get out, and now we're weeks behind! Ack! What happens if we poop out on the rid...

Bubba

Registrations are being accepted for the PAMPERED Towel and Chair Serivce for CNC 2007. $20 each or both for $35. Go to www.BubbasPamperedPedalers.com , click on scheduled events, then onto the towel and chair rental for CNC. Registrations are also being accpeted for full PAMPERING which inclu...

Claude

Let's talk about road feeling I have 2 bikes (3 with the mountain bike) and I not sure witch one I'll bring to CNC. Should 'I bring the full carbon and all the matching kit and then keep my average speed? Or Should I take my full steel "randonneur" with it fenders, panniers and toe clip pedals an...

Topic		Started By	Replies	Views	Last Post
	Need Tent Advice (Preview) I have been shopping for a tent the last couple weeks and can't make up my mind. I really don't want to spend $300 on the spiffy models since this tent will spent a looong time before it gets used again. I really like the LL Bean tents but the weatheproof tents are all $300 and up. So, any suggestions on t...	Git-r-dun	9	511	Sep 11, 2007 by atlantadona
	Greensboro riders (Preview) Can anyone train during the week? I usually go from Downtown to Bryan Park. I would love another route or someone to ride with. Thanks, Julie	Julie Clark	3	380	Sep 11, 2007 by trek59
	Advise on keeping bike dry (Preview) Need some advise on how to keep the bike dry overnight, I tried plastic bags but the handlebars and seat still get wet. What do you all do, use or recommend. Thank folks!	Susan Schneider	4	1027	Sep 11, 2007 by JimB
	Bus from Mebane to W Jefferson (Preview) We are full week riders and have transportation from Currituck, but would like to find out more info about bus leaving mebane for the 3 day riders and is it available for full week riders. There are about 8 or 10 of us in the burlington, GBO area interested. Did I read it correctly stating that it was for...	cyclingfool	0	906	Sep 10, 2007 by cyclingfool
	Driving down from southern Ontario (Preview) Anyone driving down to CNC from southern Ontario? If you are, I would love to hear from you. I am getting myself down but would love if someone could get my bike down. Thanks! sanlevrier@hotmail.com	Sandrine	0	868	Sep 10, 2007 by Sandrine
	flying back from Carrituck area?? (Preview) I'm flying from Atlanta, and thinking about trying to fly back from Va. Beach or Norfolk on Saturday afternoon or evening instead of taking the bus back to Raleigh. Anyone from the area have an idea if that would be possible? Is there a place to rent a car in Carrituck to drive to the airport - or another...	Jay Solomon	2	305	Sep 10, 2007 by Charles L. Gregory
	Yanceyville Bike Shop (Preview) Does anyone know if the ride goes through Yanceyville this year? I guess it would be between Mebane and Louisburg. There is a great bike shop there (of all places!) just off the small town square. It is run by Gilbert Anderson, and ex-racer and brevet riders and his personable wife Sue who can wren...	Raleigh Rider	0	897	Sep 9, 2007 by Raleigh Rider
	Cycle North Carolina Update (Preview) Today is the last day to register before the late fee kicks in so if you have not registered yet, you only have 8 more hours to do so. After that, there will be a late fee of $25 (week long registrants); $10 (Shorter options and non riders) added to your registration. You can still save $10 on the registra...	CNC Staff	0	485	Sep 7, 2007 by CNC Staff
	BIKE INSPECTION (Preview) Well, I think it's ridiculous for those of us who take GREAT care of our bikes and I think it's stupid that we need to keep a copy of the completed form with us at ALL times.	SAL	15	727	Sep 7, 2007 by Trikester
	Carrituck to airport? How long (Preview) Anyone have an idea how long it will take to get from the end of the ride at Carrituck to New Port News/Hampton Airport? (assuming four wheel transportation rather than 2!) Thanks. J	J, Atlanta	1	288	Sep 5, 2007 by TNT
	Seeking Ride to Chaleston SC Area at Ride End Chaleston SC (Preview) I am seeking a share-the-cost ride from Carrituck (end of the ride) to the Charleston SC area. If you have room for one more and are interested please call me at 828.508.6535. Thanks.	David	0	204	Sep 5, 2007 by David
	florida to ride end passenger wanted (Preview) driving p/up solo from ft myers to ride end, looking for passenger	jay	1	246	Sep 5, 2007 by Dave
	Last minute training woes (Preview) There're less than 5 weeks to go, and the furthest my wife and I have ever triked is 38 miles - and that almost murdered my knees! We're trying to keep up with the training program, but the heat wave's messed with our ability to get out, and now we're weeks behind! Ack! What happens if we poop out on the rid...	Rod	11	621	Sep 4, 2007 by Slacker
	Towel and Chair Service (Preview) Registrations are being accepted for the PAMPERED Towel and Chair Serivce for CNC 2007. $20 each or both for $35. Go to www.BubbasPamperedPedalers.com , click on scheduled events, then onto the towel and chair rental for CNC. Registrations are also being accpeted for full PAMPERING which inclu...	Bubba	2	364	Sep 3, 2007 by Bubba
	Style and attitude (Preview) Let's talk about road feeling I have 2 bikes (3 with the mountain bike) and I not sure witch one I'll bring to CNC. Should 'I bring the full carbon and all the matching kit and then keep my average speed? Or Should I take my full steel "randonneur" with it fenders, panniers and toe clip pedals an...	Claude	6	533	Sep 3, 2007 by Tom M
«First < 1 2 3 4 … 45 > Last» \| Page of 45 sorted by